Skip to content
Brew Method Guide

Independent · not affiliated with Amazon

Find your setup

Comparison

Turin DF54 vs DF64 Gen 2: which single-dose grinder fits your counter and burrs?

Turin's DF54 v4.1 or DF64 Gen 2.7: which single-dose flat-burr grinder fits your counter, your burr plans and Turin's warranty.

Assessment based on manufacturer documentation and independent published sources; we have not physically tested these products.

·

By Syed Hyder Ali · Updated · How we research

In short

Choose the Turin DF54 v4.1 if counter depth and weight decide it: Turin lists about 7 in deep and about 10 lb, with 54 mm flat burrs and a 150 W motor. Choose the DF64 Gen 2.7 if you expect to swap burrs: it has 64 mm flat burrs and a 250 W motor, and both Espresso Outlet, which sells aftermarket sets, and The Coffee Chronicler say 64 mm has a wider choice than 54 mm. Both are single-dose and fixed speed, so you weigh every dose either way.

Turin's one-year warranty covers only units bought from Espresso Outlet or its authorized retailers, and nothing we read says whether an Amazon seller qualifies. Check the seller before you buy. Speed does not separate them much: in one reviewer's timing the DF64 took 15 seconds for 14 g of espresso and the DF54 24, and he calls the gap "hardly something that matters for home use".

We may earn a commission when you buy through links on this page.

Turin DF54 v4.1 single-dose grinder, Black

Turin DF54 v4.1 Single Dose Flat Burr Grinder

Black, 100-120 V / 60 Hz U.S. model

Best for: Someone short on counter depth or lifting weight, who does not expect to swap burrs.

Important limitation: Fewer aftermarket 54 mm burr sets exist, and The Coffee Chronicler says its motor spins the opposite way from what Baratza and Mahlkonig burrs need.

VS

Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder

Black, 110-120 V U.S. model

Best for: Someone who expects to change burrs and has room for a larger, louder grinder.

Important limitation: It is the louder, deeper and heavier of the two.

List price $399 at Turin (Nov 16, 2026)

Amazon listing not confirmed for this exact model. The Amazon listing we found does not name the Gen 2.7, so there is no button yet. Turin's own page sells it. Maker's page (opens in a new tab)

Compare it with others

The differences

Burr size

Turin DF54 v4.1 Single Dose Flat Burr Grinder
54 mm (≈ 2.13 in)
Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder
64 mm (≈ 2.52 in)

Edge: Depends on use

Wattage

Turin DF54 v4.1 Single Dose Flat Burr Grinder
150 W
Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder
250 W

Edge: Depends on use

Dimensions (W × D × H)

Turin DF54 v4.1 Single Dose Flat Burr Grinder
4.5 × 7 × 12 in (≈ 11.4 × 17.8 × 30.5 cm)
Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder
5.2 × 10 × 12 in (≈ 13.2 × 25.4 × 30.5 cm)

Edge: Turin DF54 v4.1 Single Dose Flat Burr Grinder

Weight

Turin DF54 v4.1 Single Dose Flat Burr Grinder
4.7 kg (≈ 10.4 lb)
Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder
7.2 kg (≈ 15.9 lb)

Edge: Turin DF54 v4.1 Single Dose Flat Burr Grinder

Bean hopper

50 g (≈ 1.76 oz) · Same for both

Warranty

1 year · Same for both

Same for both models — Bean hopper: 50 g (≈ 1.76 oz); Warranty: 1 year. Values as the makers publish them; conditions in each model's spec sheet. Figures after "≈" are our unit conversions. Edge: our reading of the row, not a ranking of the models.

If weighing every dose is the part you would skip, the Baratza Encore ESP card below is a hopper-fed alternative. Still choosing among single-dose models? Our single-dose grinder picks compare them, including the Encore ESP against the DF64.

We may earn a commission when you buy through links on this page.

Choose the Turin DF54 if…

  • Your counter is shallow: Turin lists about 7 in deep, against about 10 in for the DF64.
  • You want the lighter grinder: about 10 lb against about 15 lb on Turin's pages.
  • You do not expect to swap burrs, or you will use its brew burrs for filter coffee.

Choose the Turin DF64 Gen 2.7 if…

  • You expect to swap burrs: there is a wider choice of 64 mm sets than 54 mm ones.
  • You want the 250 W motor and have room for about 10 in of depth and about 15 lb.
  • You accept more noise: Home Grounds measured over 90 dB on a DF64 Gen 2.

DF54 v4.1 and DF64 Gen 2.7: which unit, and the warranty?

Turin's US store sells the DF54 as the v4.1 and the DF64 as the Gen 2.7. The DF54 is 100-120 V; the DF64 is 110-120 V on Turin's page and 100-120 V in its manual. Turin sells separate 220 V versions with an EU plug, and a plug adapter does not change the voltage rating, so they are not for US mains. Which unit you buy also decides the warranty, covered below. The variable-speed DF64V and the hopper-fed GF64 are other grinders and are not compared here.

The same DF designs are sold under other labels. The Coffee Chronicler's reviewed DF54 was a MiiCoffee unit, and he says Zentis and Turin also sell it. Units from those sellers are not covered here, and Turin's warranty does not reach them unless the seller is one of its authorized retailers.

ItemDF54 v4.1DF64 Gen 2.7
What Turin changed
v4.1 adds a metal declumper and a larger exit chute
Gen 2.7 adds a revised internal chute, ion-generator probes around the grounds path, a convex anti-popcorn blocker and a black dosing cup
Burrs on the listing
Stainless Steel Espresso, 54 mm
Stainless steel or Red Titanium, 64 mm
Other burr sets
Red Titanium Espresso, Stainless Steel Brew
Red Titanium; a Black preorder lists brew burrs
Amazon listing
"Turin DF54 v4.1 Coffee Grinder ... Black, 120V" (B0HK4VZF1Q)
Does not name the Gen 2.7; one listing says "Gen 2.5", which no Turin page mentions
Size and weight (page)
About 7 in deep, 4.5 in wide, 12 in high; about 10 lb
About 10 in deep, 5.2 in wide, 12 in high; about 15 lb

Turin warns that reviews "show earlier units and may feature different seller branding, prices, burrs, or chute designs", so a review of an earlier DF54 or a Gen 2 does not describe these units' retention, noise or speed. The DF54's manual lists 190 x 110 x 297 mm and 4.7 kg net (about 10.4 lb), the same size and weight as the page at finer rounding.

What differs between the DF54 and DF64 that changes the choice?

Burr size, motor, size, weight, bean capacity and warranty are in the comparison above. These rows cover what a table cell cannot hold.

FactorDF54 v4.1DF64 Gen 2.7
Burr swaps
Fewer aftermarket 54 mm sets; diameter alone does not prove fit
A wider choice of 64 mm sets, including SSP, which ship separately
14 g of espresso (one reviewer)
24 seconds
15 seconds
Noise
Not quiet; milder than the DF64 (Coffee Chronicler)
Over 90 dB measured on a Gen 2 (Home Grounds)
Static
A bit more with light roasts at coarse settings
Less than the DF54 in the same reviewer's comparison

What the rows mean for you:

  • Burr size. Turin says burr diameter alone does not decide cup quality or fit, and The Coffee Chronicler calls the DF54's espresso very similar to the DF64 Gen 2's. Pick the size for the counter and the burr plan, not for a quality ranking.
  • Burr swaps. A 54 mm set has to be made to fit the DF54. Espresso Outlet, which sells SSP sets for the DF64, says the DF64 has the wider choice, and The Coffee Chronicler says the same of 64 mm against 54 mm. Turin's manual excludes failures caused by "using accessories other than our company's", and it does not say whether fitting aftermarket burrs counts, so ask Turin before you swap if the warranty matters.
  • Motor and timing. The DF64's motor is 250 W against 150 W. Espresso Outlet notes that wattage is "a specification, not a measured grind-speed or cup-quality result". Speed, noise and static has the timings and where they conflict.
  • Depth and weight. About 7 against 10 in deep, and about 10 against 15 lb, on Turin's pages. In its manuals the gap is smaller: 190 against 225 mm deep and 4.7 against 7.2 kg. Either way the DF54 is the shallower and lighter unit; the counter figure draws both.
  • Bean capacity. Turin's page lists the DF54 at about 20 g without the bellows and up to about 50 g with it, and its manual lists 25 g; the DF64 is about 50 g with the bellows. A single-dose grinder takes one weighed dose, so the DF54's smaller figure, about 20 g without the bellows, matters only for a larger dose.
  • Warranty. Both carry one year, and both depend on where you buy. The warranty section has the rule.

What do 54 mm and 64 mm burrs change, and what do they not?

They change what you can fit later and how much room the grinder takes. Both have flat burrs, a stepless collar and the same fixed-speed, bellows-and-plasma routine, and both offer stainless and Red Titanium burr options. The DF54 also offers Stainless Steel Brew burrs, which Turin does not recommend for a primary espresso grinder; the DF64 lists that option only on a Black preorder. Turin's own advice is to start with the factory burrs before deciding an upgrade solves a problem you notice.

They do not decide the espresso. Turin and Espresso Outlet both say burr diameter alone does not decide the cup, and The Coffee Chronicler found the DF54 "very similar to its bigger sibling, the DF64 Gen 2, when it comes to espresso performance", with almost identical burr geometry. That review used a MiiCoffee unit, not Turin's current v4.1.

How do the DF54 and DF64 compare for speed, noise and static?

The only same-test pair is The Coffee Chronicler's DF54 review (published April 8, 2024, updated November 3, 2026): 14 g of espresso took 15 seconds on the DF64 and 24 on the DF54. He calls the difference "hardly something that matters for home use". His DF54 was a MiiCoffee unit and his DF64 the Gen 2 from his earlier review, before the Gen 2.7 change.

Other timings conflict with that pair. His DF64 Gen 2 review says a typical double can be ground in 7 to 11 seconds, and Home Grounds says less than 15 seconds for 20 g. Those use different doses and settings, so no single DF64 figure is settled, and the importer's own comparison states it is not "a new side-by-side speed, noise, retention or blind-tasting test".

On noise, Home Grounds measured over 90 dB on the DF64 Gen 2, and The Coffee Chronicler calls the DF54 "not a quiet grinder, but a bit more easy on the ears". No source gives a DF54 decibel figure. On static he found "a bit more static with lighter roasts at coarser settings" on the DF54 than on the DF64 Gen 2, even though both have a plasma generator.

Which one fits your counter?

On Turin's page figures the DF54 covers about 32 sq in of counter (4.5 x 7) and the DF64 about 52 (5.2 x 10), so the DF64 takes about 1.65 times the area; on the manual figures it is about 32 against 45 sq in, about 1.4 times (our arithmetic). Turin advises about 10 inches of counter depth for the DF64. If a cabinet sits low above the counter, the roughly 12 in height on both is the limit to check, with room for the bellows.

What does Turin's warranty cover, and who may sell it?

Turin's warranty is one year from purchase (from receipt for preorders), covers parts and labor for defects in materials and workmanship, and goes only to the original purchaser with proof of purchase. Labor is covered only if you ship the unit to Espresso Outlet or an authorized warranty location, shipping is covered for the first 30 days if you keep the original packaging, and commercial use voids it. The DF64 manual adds that faulty parts are replaced free "except burr"; the DF54 manual says the same.

Turin's warranty also excludes damage from lack of upkeep: cleaning the exit chute, cleaning the plasma generators weekly, and adjusting the collar weekly with the burrs spinning ("coffee oils can act like glue"), and grounds left in the threads can jam the adjusting disc and void a claim (Turin's warranty terms and manuals). O-rings, gaskets and burrs are wear items. The rule that matters when you shop: the warranty applies "only to products purchased directly from Espresso Outlet LLC or our authorized retailers", and Espresso Outlet, which says it is the exclusive US importer for Turin, provides no support or warranty for Turin bought from unauthorized sellers. We could not confirm whether the seller behind either Amazon listing is an authorized retailer: the DF54 listing shows the Turin Grinders brand but no seller name we could read, and the DF64's listing does not name the Gen 2.7. Check the seller name on the listing and ask Espresso Outlet before you rely on the warranty. Buying from Turin's own store is the route the policy names.

What else do you need?

Both need a scale, because neither weighs or meters a dose, and a funnel sized to your basket if you grind into a smaller portafilter. The 54 in DF54 is its burr size, not a portafilter size: grind into the supplied 58 mm cup and transfer. Espresso Outlet lists a declumper as a periodic wear item for the DF64 and food-safe grease for its threads after a deep clean; we found no such list for the DF54. Both manuals say not to wash the grinder with water; how to clean a coffee grinder covers dry brushing.

What could we not compare, and what if neither fits?

  • Retention: The Coffee Chronicler reports 0.2 to 0.3 g on the DF54 (0.0 to 0.1 g with the bellows) and Home Grounds about 0.3 g on the DF64 Gen 2 with the bellows, on different doses and routines, so we do not compare them.
  • A DF54 decibel figure, speed on the current v4.1 and Gen 2.7, and any difference in the cup between Turin's current units: no source tests them.
  • Burr speed: Turin lists none for either; two reviewers state 1,400 rpm for the DF64 Gen 2.
  • The DF64V, GF64, other brands' units and the 220 V versions.

If neither fits, the cards above cover a hopper-fed grinder and a filter-only one, and our single-dose grinder picks compare more.

Where do Turin's pages, its manuals and the reviews disagree?

  • DF64 depth: about 10 in (page), 225 mm or about 8.9 in (manual). DF64 weight: about 15 lb (page), 7.2 kg (manual).
  • DF54 bean capacity: about 20 g, up to 50 g with the bellows (page), 25 g (manual).
  • DF64 hopper: about 50 g with the bellows (page); grinder 30 g and blowing hopper 50 g (manual). The two agree on 50 g with the bellows.
  • DF64 voltage: 110-120 V (page), 100-120 V (manual); both include 120 V.
  • DF64 grind time: 15 seconds for 14 g in one review of the DF54, 7 to 11 seconds for a double in another, under 15 seconds for 20 g in a third.

Alternatives

We may earn a commission when you buy through links on this page.

At a glance

We may earn a commission when you buy through links on this page.

64 mm burrs, wider burr choice, 250 W
Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder

Frequently asked questions

Who makes the DF54 and DF64?

Turin Grinders says it is a US brand whose products are manufactured in China. Espresso Outlet LLC runs Turin's US store, is its exclusive US importer and provides its warranty. Other brands such as MiiCoffee sell the same designs, and those units are not covered here.

Can the DF54 take 64 mm burrs?

No. Espresso Outlet says the DF54 uses its own 54 mm format, and Turin says burr diameter alone does not establish that a set fits.

Is the DF64 better for espresso?

Not by burr size. Turin and Espresso Outlet both say diameter alone does not decide the cup, and The Coffee Chronicler found the two very similar for espresso.

Sources

  1. Turin DF54 v4.1 Single Dose Flat Burr Grinder (product page and product feed) — Turin Grinders (Espresso Outlet LLC), accessed November 17, 2026
  2. Turin DF64 Gen 2.7 Single‑Dose Coffee Grinder (product page and product feed) — Turin Grinders (Espresso Outlet LLC), accessed November 17, 2026
  3. Turin DF54 user manual (PDF) — Turin Grinders, accessed November 17, 2026
  4. Turin DF64 Gen 2 user manual (PDF) — Turin Grinders, accessed November 17, 2026
  5. Warranty Terms — Espresso Outlet LLC (DBA Turin Grinders), accessed November 17, 2026
  6. About us — Turin Grinders, accessed November 17, 2026
  7. DF54 vs DF64: Turin v4.1 and Gen 2.7 Compared (September 1, 2026) — Espresso Outlet, accessed November 17, 2026
  8. DF54 review (published April 8, 2024, updated November 3, 2026) — The Coffee Chronicler, accessed November 17, 2026
  9. DF64 Gen 2 Review: Second Round, First in Class (published August 12, 2023, updated September 6, 2025) — The Coffee Chronicler, accessed November 17, 2026
  10. DF64 Gen 2 Grinder: Reviewing The Updated DF64 Grinder (updated February 28, 2025) — Home Grounds, accessed November 17, 2026
  11. Turin DF54 support guide — Espresso Outlet, accessed November 16, 2026
  12. Turin DF54 User Manual (image PDF, read by OCR), PDF page 2: Safety Precautions; Cleaning Process of Grinder — Turin Grinders, accessed November 17, 2026
  13. Turin DF64 Gen 2 support guide and comprehensive troubleshooting guide — Espresso Outlet, accessed November 16, 2026
  14. Manuals/Downloads (DF64 Gen 2 user manual and exploded view) — Espresso Outlet, accessed November 16, 2026
  15. Turin DF64 Gen 2 User Manual (image PDF, read by OCR), PDF page 2: Safety Precautions; Cleaning Process of Grinder — Turin Grinders, accessed November 17, 2026
  16. Encore ESP ZCG495 product page (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  17. Encore ESP Operations Manual v1.0 (January 2023) — Baratza (Breville USA), accessed November 16, 2026
  18. Baratza Encore ESP review — Tom's Guide, accessed November 16, 2026
  19. Baratza Encore ESP review: Read THIS before buying — Coffee Chronicler, accessed November 16, 2026
  20. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 3: Safety Information — Baratza (Breville USA), accessed November 16, 2026
  21. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 7: Care & Cleaning (Removing and Reinstalling the Hopper) — Baratza (Breville USA), accessed November 16, 2026
  22. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 8: Removing and Reinstalling the Ring Burr; Removing and Reinstalling the Cone Burr (its parts diagram, A to G, is on PDF page 9) — Baratza (Breville USA), accessed November 16, 2026
  23. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 10: Cleaning the Grounds Bin, Hopper and Burrs; A Clogged Grinder — Baratza (Breville USA), accessed November 16, 2026
  24. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 11: Warranty & Service — Baratza (Breville USA), accessed November 16, 2026
  25. Encore ESP support hub, Coffee Brewing FAQs: "What cleaning and maintenance does my grinder need?" (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  26. Ode Brew Grinder Gen 2 - US product page — Fellow, accessed November 16, 2026
  27. Ode Brew Grinder Gen 2 Safety and Maintenance manual (US, NGAAUS) — Fellow, accessed November 16, 2026
  28. Ode Standard Brew Burrs - US parts page — Fellow, accessed November 16, 2026
  29. Fellow Ode Coffee Grinder Review (Gen 2 update) — Home Grounds, accessed November 16, 2026
  30. Fellow Stagg EKG Pro Kettle & Ode Grinder 2 Review: Worth the Upgrade? — Gear Patrol, accessed November 16, 2026
  31. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 4 (printed pages 6–7): Important; Caution — Fellow, accessed November 16, 2026
  32. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 5 (printed pages 8–9): Cleaning and Use (Before Use) — Fellow, accessed November 16, 2026
  33. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 6 (printed pages 10–11): General Cleaning; Automatic Cleaning — Fellow, accessed November 16, 2026
  34. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 7 (printed pages 12–13): Removing and Replacing the Grinding Burrs — Fellow, accessed November 16, 2026
  35. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 8 (printed pages 14–15): Removing and Replacing the Grinding Burrs (continued) — Fellow, accessed November 16, 2026
  36. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 9 (printed pages 16–17): Warranty — Fellow, accessed November 16, 2026
  37. How do I keep the Ode Brew Grinder Gen 2 clean? (Fellow Help Center, Ode Gen 2: Product Care & Materials) — Fellow, accessed November 16, 2026
  38. How to clean & maintain your Ode Brew Grinder (Fellow Help Center; covers Ode Gen 2 and Ode Gen 1) — Fellow, accessed November 16, 2026