Single-serve
How to descale a Keurig
Which buttons to press, how long it takes and when the light goes off, for the main Keurig brewer families, each from its own Use & Care Guide. The vinegar question is answered from Keurig's own documents.
Assessment based on manufacturer documentation and independent published sources; we have not physically tested these products.
By Syed Hyder Ali · Updated · How we research
In short
To descale a Keurig, run Keurig Descaling Solution through the brewer when the descale light comes on, or about every three months; Keurig's descale page says every 3 to 6 months. The K‑Supreme, K‑Supreme Plus, K‑Slim, K‑Café Barista Bar, K‑Express and K‑Mini Mate Plus enter descale mode when you hold the 8 oz and 12 oz buttons together for 3 seconds, then you brew until the ADD WATER light comes on and finish with fresh-water rinse brews. The Essentials brewers, the K‑Duo, the K‑Mini, the SMART brewers and the older K‑Elite and K‑Café use different steps, so find your family in the table first.
This page covers home K‑Cup brewers. Where your brewer's own Use & Care Guide says something different, follow the guide. Keurig's guides name its own descaling solution (a few also a descale pouch); the vinegar question has its own section below.
Steps follow Keurig's own Use & Care Guides, put in plain words and credited to each guide.
Assumptions and exclusions
This assumes
- A home K‑Cup brewer, not a commercial one
- Keurig Descaling Solution
- Your brewer's own Use & Care Guide wins where it differs
- The water filter cartridge is taken out first
This does not cover
- Commercial brewers: contact your Keurig authorized distributor
- Brewers not in the table
- Repairs and warranty claims
- Nespresso and other makers' machines
Which Keurig do you have?
The model name is on the brewer and on the cover of its Use & Care Guide. Find the row, then use its link to the steps.
| Brewer family | How you enter descale mode | Time Keurig states | Steps |
|---|---|---|---|
K‑Supreme, K‑Supreme Plus | Hold 8 oz and 12 oz together for 3 seconds | About 15 to 20 minutes | |
K‑Slim | Hold 8 oz and 12 oz together for 3 seconds, until the DESCALE light is solid | 15 to 20 minutes | |
K‑Café Barista Bar, K‑Express | Hold 8 oz and 12 oz together for 3 seconds; start with the 12 oz button | About 20 minutes | |
K‑Iced Essentials | Hold 6 oz and 10 oz together for 3 seconds; start with the 8 oz button | About 20 minutes | |
K‑Express Essentials (Gen 2 guide) | Hold SIZE and BREW together for 5 seconds | About 20 minutes | |
K‑Supreme SMART | Follow the screen, or both arrows for Settings, then Descale Mode | 15 to 20 minutes | |
K‑Duo Essentials (Gen 2 guide) | Hold CUPS and OZ together for 3 seconds | Not listed | |
K‑Duo Plus (first-generation guide) | No descale mode: the solution goes through rinse brews | About 75 minutes | |
K‑Mini, K‑Mini Plus | No descale mode: a one-third measure, then a 30-minute soak | About 45 minutes | |
K‑Mini Mate Plus | Hold 8 oz and 12 oz together for 3 seconds | 10 to 15 minutes | |
K‑Elite, K‑Café (original) | No descale mode: rinse brews at the largest size, a 30-minute stand | About 45 minutes |
Even two Essentials brewers differ: Keurig's K‑Iced Essentials guide uses 6 oz and 10 oz held for 3 seconds, while its K‑Express Essentials guide uses SIZE and BREW held for 5 seconds. A sister model is not proof that the steps match, so check the guide for your exact brewer. Not in the table: the K‑Brew+Chill, the Keurig 2.0 line, the K‑Classic, K‑Select, K‑Compact and K‑Latte, the K‑Mini Mate without "Plus", and any brewer released recently. For any of these, use the brewer's own Use & Care Guide from Keurig's support site, or the "find your brewer's instructions" link on Keurig's descale page (linked under Sources).
What do you need before you descale?
- A large ceramic mug, never a paper cup. The guides set a minimum for some brewers: 10 oz for the K‑Iced Essentials, K‑Express Essentials and K‑Café Barista Bar, and 14 oz for the K‑Express and the K‑Mini Mate Plus.
- Keurig Descaling Solution and fresh water. Most guides use the whole bottle plus a refilled bottle of water. The K‑Mini and K‑Mini Plus use only one-third of the bottle (4.6 oz). The K‑Express and SMART guides also allow a descale pouch with 24 oz of water (a 2 oz pouch on the SMART), and the K‑Café Barista Bar guide names the pouch too, pointing to keurig.com/descale for its steps.
- A sink, because every brew of solution or rinse water is poured away.
- An empty pod holder. Keurig says to put no K‑Cup pod in it.
- The water filter cartridge out, where the brewer takes one (the K‑Duo, K‑Elite, K‑Café, K‑Mini Mate Plus and SMART guides say so).
What the guides ask for: a ceramic mug, not a paper cup; the water filter cartridge out; and the full fresh-water rinse at the end.
How do you descale each Keurig brewer family?
Each block below follows that family's own guide, with Keurig's button and light names. One note comes from the other guides (the K‑Mini Mate Plus guide does not print it): the solution can foam, and that is a normal reaction with the scale. In a heavily scaled brewer you may see little or no output and hear air blowing out. If that happens, switch the brewer off and unplug it, pour out any solution left in the reservoir, rinse the reservoir and refill it with water, plug in and power on, and repeat the fresh-water rinse. If the problem persists, leave it unplugged for at least 30 minutes before continuing the rinse.
K‑Supreme and K‑Supreme Plus
- With the brewer plugged in and powered off, pour the whole bottle of solution into the empty reservoir, refill the bottle with water and add that too. Put a large mug on the drip tray.
- Hold 8 oz and 12 oz together for 3 seconds. When BREW flashes, press it. When the brew finishes, pour the hot liquid into the sink and repeat until the ADD WATER light comes on.
- Empty and rinse the reservoir and refill it to the MAX line with fresh water. Press the flashing BREW and discard each brew. Repeat until the DESCALE notification turns off. The brewer then leaves descale mode.
Source: the K‑Supreme Plus and K‑Supreme Use & Care Guides. Keurig states about 20 minutes (15 to 20 in one line of the Plus guide).
K‑Slim
- Pour the bottle of solution into the emptied reservoir, refill the bottle with water and add it. Put a large mug on the tray.
- With the brewer powered off, hold 8 oz and 12 oz together for 3 seconds until the DESCALE light turns solid. When BREW flashes, press it and discard the brew. Repeat until the ADD WATER light comes on.
- Empty the reservoir and refill it to MAX with fresh water. Press BREW each time it flashes and repeat until the ADD WATER light comes on again. The brewer then leaves descale mode.
Source: the K‑Slim Use & Care Guide, 15 to 20 minutes.
K‑Café Barista Bar and K‑Express
- Pour in the whole bottle of solution, refill the bottle with water and add it. Put a large mug on the tray (10 oz at least for the Barista Bar, 14 oz for the K‑Express).
- Plugged in and powered off, hold 8 oz and 12 oz together for 3 seconds. When the 12 oz button flashes, press it and discard the brew. Keep brewing until the ADD WATER light comes on.
- Empty and rinse the reservoir, refill to MAX with fresh water, press the flashing 12 oz button and discard each brew. Continue until the DESCALE notification turns off.
Source: the K‑Café Barista Bar and K‑Express Use & Care Guides, about 20 minutes. The DESCALE light stays on until the whole procedure is finished.
K‑Iced Essentials and K‑Express Essentials
The two guides differ only in how you enter descale mode; the rest is the same.
- Pour in the whole bottle of solution, refill the bottle with water and add it. Put a large mug (10 oz at least) on the tray.
- Enter descale mode: for the K‑Iced Essentials, hold 6 oz and 10 oz together for 3 seconds; for the K‑Express Essentials (Gen 2 guide), hold SIZE and BREW together for 5 seconds. When the button flashes, press it (8 oz on the K‑Iced Essentials, BREW on the K‑Express Essentials). Keep brewing 8 oz and discarding until the ADD WATER light comes on.
- Empty the reservoir, refill to MAX with fresh water, and keep brewing 8 oz each time the button flashes until the DESCALE notification turns off.
Source: the K‑Iced Essentials and K‑Express Essentials (Gen 2) Use & Care Guides, about 20 minutes.
SMART brewers (K‑Supreme SMART guide)
- When the descale notification appears, press the left arrow, then CONTINUE, and choose your product: the 14 oz bottle or the 2 oz pouch. With no notification showing, press both arrows to open Settings and choose Descale Mode. Take the water filter out first.
- Empty the reservoir and add the solution: the whole bottle plus a refilled bottle of water, or the pouch plus 24 oz of water. Put a large mug on the tray.
- Press the flashing BREW to dispense 12 oz of hot liquid, discard it, put the mug back and repeat until the reservoir is empty and the screen says ADD WATER.
- Rinse the reservoir, refill to MAX with fresh water and press BREW each time it flashes. Repeat until the screen says DESCALE COMPLETE.
Source: the K‑Supreme SMART Use & Care Guide, 15 to 20 minutes. This is the K‑Supreme SMART guide only; another SMART model follows its own guide.
K‑Duo Essentials (second-generation guide)
- Empty the reservoir and take out the water filter. With the brewer plugged in and powered off, add the solution (whole bottle plus a refilled bottle of water). Put a large mug on the drip tray and the carafe on the heating plate.
- Hold CUPS and OZ together for 3 seconds. Press the flashing BREW for the single-serve descale, then BREW again for the carafe side, which is only a partial brew. When it finishes the ADD WATER light comes on; empty the mug and the carafe.
- Rinse the reservoir and fill it to MAX with fresh water. Press the flashing BREW for a single-serve rinse, again for a second one, then for the carafe rinse, which empties the reservoir. The descale light then goes off.
Source: the K‑Duo Essentials Use & Care Guide. Keurig states no time.
K‑Duo Plus (first generation)
This one takes about 75 minutes, mostly waiting, and has no descale-mode buttons.
- Power the brewer off, empty the reservoir and take out the water filter. Add the whole bottle of solution plus a refilled bottle of water. Put a large mug on the tray.
- Press POWER, select POD, press 12 and BREW for a single-cup rinse brew, and discard it. Put the carafe on the tray, press CARAFE, 12 and BREW, and discard that too.
- Let the brewer stand for at least 30 minutes, then pour out any solution left in the reservoir and rinse it.
- Refill to MAX with fresh water and run four 12-cup carafe brews in total, then four 12 oz single-cup brews in total, discarding each.
Source: the K‑Duo Plus Use & Care Guide.
K‑Mini and K‑Mini Plus
There is no descale mode on these two and the procedure takes about 45 minutes. Keurig says ceramic mug only.
- Turn the brewer on. Pour one-third (4.6 oz) of the bottle of solution into the reservoir and add fresh water to the 10 oz fill level. Put a ceramic mug on the drip tray plate. Lift and lower the handle with no pod and press BREW. Pour the result into the sink.
- Repeat that, but as the brewer starts to dispense and the brew light turns solid, press POWER. Let it stand for at least 30 minutes. Then press and hold BREW until the solution starts to dispense, and keep holding until all of it has come out. Pour it away.
- Repeat the first step with 12 oz of fresh water only, and do it two more times. Do extra fresh-water brews if you still taste solution.
Source: the K‑Mini and K‑Mini Plus Use & Care Guides. Keurig states descaling every 3 months in the K‑Mini guide and every 3 to 6 months in the K‑Mini Plus guide.
K‑Mini Mate Plus
- Empty the reservoir, take out any water filter, and add the whole bottle of solution plus a refilled bottle of water. Put a large mug (14 oz at least) on the tray.
- Plugged in and powered off, hold 8 oz and 12 oz together for 3 seconds. Press the flashing BREW, discard the 12 oz, and repeat two to three more times until the ADD WATER light comes on.
- Rinse the reservoir, refill to MAX with fresh water and press the flashing BREW, discarding each 12 oz, until the descale notification turns off. The rinse water may come out at room temperature.
Source: the K‑Mini Mate Plus Use & Care Guide (US), 10 to 15 minutes. The plain K‑Mini Mate has its own guide, which is not covered here.
K‑Elite and K‑Café (original)
These have no descale mode. Keurig states about 45 minutes and descaling every 3 to 6 months.
- Empty the reservoir and take out the water filter. Power the brewer off, add the whole bottle of solution plus a refilled bottle of water, then power it back on.
- With a large mug on the tray, run a rinse brew at the largest size with no pod (on the K‑Elite, use the hot water button). Keep running them until the ADD WATER light comes on, with the brewer left on.
- Let it stand for at least 30 minutes, then pour out the solution left in the reservoir and rinse it.
- Fill to MAX with fresh water and run rinse brews at the largest size, at least 12 in all. You may need to refill the reservoir once.
Source: the K‑Elite and K‑Café Use & Care Guides.
How often should you descale, and what does the descale light mean?
Keurig's descale page says every 3 to 6 months, or, on select brewers, when the descale light comes on. The brewer guides say every 3 months, most adding "or when the descale notification turns on", for the K‑Supreme, K‑Supreme Plus, K‑Slim, K‑Café Barista Bar, K‑Express, K‑Iced Essentials, K‑Express Essentials, K‑Duo Essentials, SMART and K‑Mini Mate Plus, and every 3 to 6 months for the K‑Elite, K‑Café and K‑Mini Plus. Two older guides disagree with themselves or their siblings: the K‑Mini says 3 months where the K‑Mini Plus says 3 to 6, and the K‑Duo Plus guide gives both figures in neighbouring paragraphs. Keurig adds that scale builds up faster in harder water, so descale more often there. It recommends bottled or filtered water, not distilled.
The light or notification goes away only when the full procedure is finished, so stopping after the solution brews leaves it on. The K‑Express, K‑Iced Essentials, K‑Express Essentials and K‑Mini Mate Plus guides also say the brewer reminds you after every 250 brews. As arithmetic only, not a Keurig figure: 250 brews at two a day is 125 days, about 4 months; at one a day it is 250 days, about 8 months. A light user who waits for the reminder lands well beyond the 3-month line Keurig gives, so go by the calendar.
Can you descale a Keurig with vinegar?
Keurig's current guides name Keurig Descaling Solution (the K‑Café Barista Bar, K‑Express and SMART guides also name a descale pouch). An older Keurig PDF, "Descaling Your Keurig Brewer", also lists white vinegar as a second method for the older K‑Cup brewers of its day, and citric acid for one model, the K130. Both are Keurig documents, and they do not say the same thing.
Where sources disagree
- The current Use & Care Guides (K‑Supreme, K‑Slim, Essentials, K‑Mini, K‑Mini Mate Plus, K‑Duo, K‑Elite, K‑Café and SMART) list Keurig Descaling Solution, and a pouch in three of them. None says vinegar is allowed or forbidden.
- The older PDF sets "Method 1" (Keurig Descaling Solution) against "Method 2" (white vinegar) for all K‑Cup home brewers of that time, with its own amounts and waiting times, not reproduced here. It is undated, and copies in the Internet Archive go back to 2015. It names the K10 Mini Plus, K130, K145, K155, Vue and Rivo brewers. A page in the same PDF is headed "The Only Solution Approved for Keurig Brewers" above its solution method.
The documents support one thing: use the method in your own brewer's Use & Care Guide; a current brewer's guide documents the solution. Among the Keurig documents read for this page, none says vinegar damages a brewer or voids a warranty, and none says it is safe on a current model, so this page makes neither claim.
What if the descale light stays on or the brewer brews a partial cup?
The light stays on
Keurig's K‑Café Barista Bar, K‑Express, K‑Iced Essentials and K‑Mini Mate Plus guides say the full descaling procedure must be completed to turn the light off. That means the rinse brews as well as the solution brews. If you stopped early, run the rinse until the notification goes off.
A partial cup or little output
- Keurig's K‑Supreme Plus guide cleans the exit needle like this: lift out the pod holder assembly, detach the funnel and push a straightened paper clip into the needle at the bottom of the pod holder. It cleans the entrance needles on the underside of the lid the same way, with the handle raised, then runs two cleansing brews with no pod. The needles are sharp.
- If the brewer foamed and gave little or no output during descaling, follow the foam note at the top of the steps (the K‑Mini Mate Plus guide has no such note).
- Keurig's K‑Supreme Plus guide adds a purge for a partial cup: power off, hold BREW and 12 oz for 5 seconds until water starts dispensing, release, let it purge and discard.
- If you have repeated the descale procedure twice and it still brews a partial cup, Keurig tells you to contact its customer service.
Who to call
Keurig lists Customer Support at 1-866-901-BREW (2739) in its guides, including the K‑Supreme Plus and K‑Mini Mate Plus. This page gives no repair steps beyond what the guides print.
What should you do between descales?
- After each brew: take out the used pod. If the brewer has sat unused for days, run a cleansing brew (a brew with no pod) before the first cup.
- Weekly: Keurig's guides list Keurig Rinse Pods weekly to reduce flavor carryover between brews; hand-wash the reservoir, lid and drip tray in warm soapy water. The parts are not dishwasher safe, and Keurig says not to dry the inside of the reservoir with a cloth, because lint can stay behind.
- Every 2 months: replace the water filter cartridge, if you use one.
- When the needles clog: use the paper-clip steps above.
Not on the list, or ready to switch?
If your brewer is not in the table, use its own Use & Care Guide from support.keurig.com, or call Keurig at the number above. A commercial brewer is a different case: Keurig's K‑3500 guide tells owners to contact their Keurig authorized distributor, and the commercial brewers' pages sit at commercial.keurig.com. If you own a Nespresso, the steps are in how to descale a Nespresso. Care for drip machines, kettles and grinders is in cleaning and descaling other coffee makers. If you would rather replace the brewer, coffee makers for one person picks across three formats, and single-serve coffee makers lists the capsule and mug-mode machines this site covers; this site does not review Keurig brewers yet.
Sources
- K‑Supreme Plus Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Supreme Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Supreme SMART Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Slim Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Café Barista Bar Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Express Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Iced Essentials Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Express Essentials (Gen 2) Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Duo Essentials (Gen 2) Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Duo Plus Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Mini Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Mini Plus Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Mini Mate Plus Use & Care Guide (Rev B) — Keurig, accessed November 17, 2026
- K‑Elite Use & Care Guide — Keurig, accessed November 17, 2026
- K‑Café Use & Care Guide — Keurig, accessed November 17, 2026
- K‑3500 commercial brewer Use & Care Guide — Keurig, accessed November 17, 2026
- Keep your brewer running at peak performance (descale page, read from an Internet Archive copy of 2026-10-08) — Keurig, accessed November 17, 2026
- Descaling Your Keurig Brewer (older PDF, read from an Internet Archive copy) — Keurig, accessed November 17, 2026