Nespresso
How to descale Nespresso machines, model by model
Find your machine for Nespresso's own steps, the signal that calls for them, and where Nespresso's documents disagree.
Assessment based on manufacturer documentation and independent published sources; we have not physically tested these products.
By Syed Hyder Ali · Updated · How we research
In short
To descale a Nespresso, use Nespresso's own Descaling Kit; Nespresso says vinegar and store-bought descalers may damage a machine. The steps depend on your machine. Start when your machine signals it; the four two-button models list no signal and count espressos instead.
Find yours: CitiZ · Essenza Mini · Inissia · Pixie · Creatista Plus · Vertuo Next · Vertuo Pop and Pop+ · VertuoPlus · Vertuo Creatista · Vertuo Lattissima · Another model
Worked example
- Question
- Weeks between descales
- Machine
- Nespresso CitiZ (Original)
- Water
- Medium, 180 mg/L calcium carbonate
- Use
- 2 espressos of 40 mL a day (assumed)
Nespresso's manual table, medium water: 600 espressos ÷ 2 a day = 300 days, about 43 weeks. Nespresso's guide: 3 months, about 13 weeks, or 300 capsules ÷ 2 a day = 150 days; the 3 months comes first.
13 or 43 weeks
Both figures are Nespresso's and it does not say which governs; the arithmetic is ours. At 4 espressos a day the guide's 300 capsules run out first, after 75 days.
Assumptions and exclusions
This assumes
- A US model, descaled with Nespresso's own Descaling Kit
- Your machine's own manual or on-screen message wins if it differs
- Every step is Nespresso's own, from its published documents
- Documents as read on 2026-11-17
This does not cover
- Machines not named here: they are listed and routed to Nespresso
- Vinegar, citric acid and third-party descalers
- Milk-frother and Aeroccino care
- Non‑Nespresso machines and Keurig brewers
How to descale Nespresso: what holds for every machine?
Every procedure here has the same three parts: a descaling solution runs through the machine, fresh water rinses it out, and the machine rests. What changes from model to model is how you start it, how much liquid goes in and how big a container you need. Nespresso states three rules that hold for every machine:
- Use the Nespresso Descaling Kit and nothing else. Nespresso's guides say other solutions "(such as vinegar or store-bought descalers) may cause damage to your Nespresso machine"; the kit's page says "Never use vinegar as it can damage your machine."
- Do not top up the water tank while the cycle runs. The kit page and the guides both say not to fill the tank during descaling.
- Wipe the machine with a damp cloth afterwards. The kit page says so, and the guides and Vertuo manuals add a 10-minute rest or dry time before the next coffee.
The solution is a hazard as well as a cleaner. Nespresso says it may irritate the eyes and skin and can damage or discolor surfaces, so stand something under the machine and wipe up any spill at once. Keep it away from children and do not swallow it. If it gets in your eyes, Nespresso says to rinse with plenty of water for 15 minutes and seek medical advice. The kit page names L-(+)-lactic acid as its hazardous ingredient.
One measure of liquid is a packet in the guides, a sachet in the Original manuals and a unit in the Vertuo manuals; this page says unit.
Which Nespresso machine do you have?
Find the name on your machine, then follow its row to its steps. The row also shows what tells you it is time.
| Machine | Line | What calls for descaling | How you start it |
|---|---|---|---|
Original | No light listed; a count of espressos by water hardness | Hold Espresso and Lungo together | |
Original | No light listed; the same count as the CitiZ | Hold Espresso and Lungo together | |
Original | No light listed; a larger count by hardness | Hold Espresso and Lungo together | |
Original | No light listed; the Inissia's count | Hold both cup buttons together | |
Original | DESCALE NOW on the screen | Menu: Maintenance, then Descale | |
Vertuo | Light alternates orange and white 3 times, then stays on | Hold the button 7 seconds, twice, with the lever | |
Vertuo | Button blinks orange 3 times, then steady white | The same two 7-second holds | |
Vertuo | Steady green and red light | Button and lever down together for 3 seconds | |
Vertuo | Descaling light blinks orange | Hold Steam and Milk Temperature | |
Vertuo | Descale alert blinks orange | Plug in the descaling pipe; the machine enters the mode itself |
Two names repeat across Nespresso's lines. The Lattissima machines (Gran Lattissima, Lattissima One, Plus, Pro, Touch and Premium) and the Creatista, Creatista Pro and Creatista Plus belong to the Original line, while the Vertuo Lattissima and Vertuo Creatista belong to the Vertuo line, and their procedures differ. Nespresso's US support pages list them as separate machines. If you are not sure whether yours is Original or Vertuo, Original versus Vertuo explains the two systems, and the Nespresso machines we cover lists each model.
What are the descaling steps for your machine?
Before any of them: stand something under the machine, have the empty container your machine's block names, and have the kit open. The CitiZ, Essenza Mini, Inissia, Pixie, Creatista Plus, Vertuo Next, Pop+ and VertuoPlus take one unit of liquid; the Vertuo Creatista and the Vertuo Lattissima take two. Nespresso's pages do not say how many descales one kit covers, so check the box. Time runs from about 15 minutes on the Essenza Mini and Creatista Plus to 25 on the Vertuo Creatista. Where a block says Nespresso's documents differ, the difference is explained under where Nespresso's documents disagree.
CitiZ: two buttons, no descale light
- Signal: no light listed; descale by the count in the cadence table.
- Liquid and water: 1 unit in 0.5 L (17 fl oz) of drinking water; the guide says fill the tank halfway.
- Container: at least 1 L (34 fl oz) under the coffee outlet.
- Time: 15 to 20 minutes.
- Turn the machine on and wait until the cup buttons are steady. Take out the capsule and close the lever.
- Empty the drip tray and the used-capsule container. Fill the tank with 0.5 L of drinking water and add 1 unit. Put the container under the coffee outlet.
- Hold Espresso and Lungo together: 3 seconds in Nespresso's support page, guide and 2016 manual, 5 seconds in its 2021 manual. Both lights blink quickly once descaling mode is on.
- Press Lungo and let the tank run empty.
- Pour the collected solution back into the tank, put the container back under the outlet and press Lungo again.
- Empty and rinse the tank, fill it with fresh water and press Lungo to run the whole tank through. Do this twice: the 2021 manual shows two rinses, the support page says "repeat twice" and the guide shows one.
- Hold Espresso and Lungo together to leave descaling mode: 3 seconds in the support page and 2016 manual, "3-5 seconds" in the guide, 5 seconds in the 2021 manual.
- Empty and rinse the container and trays, refill the tank, wipe the machine with a damp cloth and let it rest 10 minutes.
Nespresso, CitiZ support page; CitiZ Descaling Guide, pp. 3-5; user manual of the Citiz, Essenza Mini, Inissia and Pixie (2021), pp. 15-19; CitiZ manual (2016), pp. 17-18.
Essenza Mini: two buttons, no descale light
- Signal: no light listed; descale by the count in the cadence table, the same as the CitiZ's.
- Liquid and water: 1 unit in drinking water up to the 0.6 L (20.3 fl oz) line.
- Container: at least 1 L (33.8 fl oz) under the coffee outlet.
- Time: about 15 minutes.
- Lift the lever and close it again to drop the capsule into the used-capsule container. Empty the drip tray, the drip base and the container.
- Pour in 1 unit and fill the tank to the 0.6 L line. Put the container under the coffee outlet.
- With the machine on, hold Espresso and Lungo together for 5 seconds. Both lights blink. The Mini has no hold-time conflict: its 2017 manual, the 2021 manual and its support page all say 5 seconds.
- Press Lungo and let the tank run empty.
- Pour the collected solution back into the tank, put the container back and press Lungo again.
- Empty and rinse the tank, fill it with fresh water and run the whole tank through with Lungo. Do this twice: the 2021 manual shows two rinses, and the 2017 manual and the support page say "repeat twice".
- Hold Espresso and Lungo together for 5 seconds to leave descaling mode, then empty the drip base.
Nespresso's Essenza Mini support page fills its "Descaling Guide" slot with the Creatista and Creatista Plus guide; those steps are for a different machine, so use the steps above. Curious about the machine itself? Read the Essenza Mini review.
Nespresso, Essenza Mini instruction manual (2017), pp. 13-15; Essenza Mini support page; 2021 user manual, pp. 15-19.
Inissia: two buttons, no descale light
- Signal: no light listed; descale by the count in the cadence table.
- Liquid and water: 1 unit in 0.5 L (17 fl oz) of drinking water; the guide says fill the tank halfway.
- Container: at least 1 L (34 fl oz) under the coffee outlet.
- Time: about 15 minutes in the Inissia manual, 15 to 20 in the guide.
- Turn the machine on by pressing any cup button and wait until the lights are steady. Remove the capsule and close the lever.
- Empty the drip tray and the used-capsule container. Fill the tank with 0.5 L of drinking water and add 1 unit. Put the container under the coffee outlet.
- Hold Espresso and Lungo together for 3 seconds, as the Inissia's own manual, its guide and its support page say; the 2021 manual shared with three other machines says 5. The lights blink.
- Press Lungo and let the tank run empty.
- Pour the collected solution back into the tank, put the container back and press Lungo again.
- Empty and rinse the tank, fill it with fresh water and run the whole tank through with Lungo. Do this twice: the Inissia manual says "Repeat twice", and the guide shows one tank.
- Hold Espresso and Lungo together for 3 seconds to leave descaling mode. The lights blink while the machine heats up (25 seconds), then stay steady.
- Empty and rinse the container and trays, refill the tank, wipe the machine with a damp cloth and let it rest 10 minutes.
Nespresso, Inissia user manual, pp. 14-15; Inissia Descaling Guide, pp. 3-5; Inissia support page.
Pixie: two cup buttons, no descale light
- Signal: no light listed; descale by the count in the cadence table.
- Liquid and water: 1 unit; fill the tank halfway (the support page says 0.5 L).
- Container: at least 0.6 L under the coffee outlet, per the support page.
- Time: 15 to 20 minutes.
- Turn the machine on and wait until the cup buttons are steady. Eject the capsule and close the lever.
- Empty the capsule container and drip tray. Fill the tank halfway, add 1 unit and put the container under the coffee outlet.
- Hold both cup buttons together for 3 seconds. They blink quickly.
- Press and release the large cup (Lungo) button and let all the solution run through, then refill the tank with the collected solution and press it again.
- Discard the solution, rinse the tank thoroughly, fill it to the top with fresh water and run the whole tank through. The support page shows one rinse press; the 2021 manual shared with three other machines shows two.
- Hold both cup buttons together to leave descaling mode: 1 second in the support page, "1-3 seconds" in the guide, 5 seconds in the 2021 manual.
- Empty and rinse the capsule container and drip tray, refill the tank, wipe the machine with a damp cloth and let it rest 10 minutes.
Nespresso, Pixie Descaling Guide, pp. 3-5; Pixie support page; 2021 user manual, pp. 15-19.
Creatista Plus: DESCALE NOW on the screen
- Signal: DESCALE NOW, timed by the water hardness you set. Ignore it and the machine stops after 10 more uses, with a countdown.
- Liquid and water: 1 unit, with fresh water up to the DESCALE line on the tank.
- Container: a large container under the coffee spout and steam wand; Nespresso lists no size.
- Time: about 15 minutes.
- Turn the SELECT dial to MAINTENANCE, press SELECT, choose DESCALE and follow the on-screen prompts.
- Open and close the coffee lever to eject any used capsule. Empty and clean the capsule bucket, the drip tray and the water tank.
- Fill the tank with fresh water up to the DESCALE line and add 1 unit. Put the bucket, tray and tank back and place the large container under the coffee spout and steam wand.
- Press and release START/CANCEL. The solution runs from the coffee outlet in 5 intervals, then from the steam wand in 2.
- When the screen prompts, discard the solution, empty the bucket and tray, rinse the tank and fill it to the MAX line.
- Put the container back and press START/CANCEL for the first rinse. When prompted, empty the container and put it back.
- Add about two more inches of fresh water and press START/CANCEL for the second rinse.
- Discard the rinse water, empty and rinse the bucket and tray, refill the tank, wipe the machine with a damp cloth and let it rest 10 minutes.
If you change the type of water you use, Nespresso says to test its hardness again and update the setting under SETTINGS, so later alerts stay right. The warranty in its manual excludes damage from failing to follow care or cleaning instructions.
Nespresso, Creatista / Creatista Plus Descaling Guide, pp. 2-6; Creatista Plus user manual, pp. 32-33 and 40.
Vertuo Next: orange and white alert, two 7-second holds
- Signal: the light blinks orange and white alternately 3 times, then stays on. A few more uses are left after the alert.
- Liquid and water: 1 unit with 17 fl oz (0.5 L) of water.
- Container: at least 34 fl oz (1 L) under the coffee outlet.
- Time: about 20 minutes. Nespresso says the mode cannot be interrupted or exited.
- Empty the drip tray and the capsule container. Fill the tank with 1 unit and 17 fl oz (0.5 L) of water.
- Close and lock the machine to turn it on (if it is already locked, press the button). When the light is steady, the machine is ready.
- Open the head and let the capsule be ejected. Close the machine and leave the lever turned right, towards the front.
- Hold the button for at least 7 seconds. It blinks rapidly and you have 45 seconds to continue.
- Turn the lever left to the lock symbol, then right again, and hold the button for at least 7 seconds with the lever turned right.
- Put a container of at least 34 fl oz (1 L) under the coffee outlet. Lock the machine and press the button to start; the first phase stops by itself.
- Empty and rinse the tank, drip tray and cup support, and fill the tank with fresh water. Press the button to rinse; the machine stops by itself.
- When the button stops blinking and stays steady, descaling is done. Let the machine dry for 10 minutes.
If the machine is unplugged mid-cycle it restarts in descale mode, and both the descaling and rinsing cycles must be repeated. Nespresso's troubleshooting page for the Next adds an exit route that its descaling page rules out; see where Nespresso's documents disagree.
Nespresso, Vertuo Next user manual, pp. 26-30; Vertuo Next support page.
Vertuo Pop and Pop+: orange blinks, then steady white
- Signal: the button blinks orange 3 times, then turns steady white.
- Liquid and water: 1 unit in 0.5 L (17 fl oz) of water.
- Container: an empty container of at least 1 L (34 fl oz) under the coffee outlet, cup support removed.
- Time: about 20 minutes; cannot be interrupted.
- With the button blinking orange 3 times, turn the lever right and open the head to eject the used capsule. Empty the capsule container and the drip tray and put them back.
- Fill the tank with 0.5 L (17 fl oz) of water and add 1 unit. Remove the cup support and put the container under the coffee outlet.
- With the machine on, close the head and leave the lever turned right.
- Hold the button for at least 7 seconds, or until the light turns off. It blinks orange rapidly and you have 45 seconds to continue.
- Turn the lever left to the lock symbol, then right again, and hold the button again for about 7 seconds until the light turns off and blinks orange rapidly.
- Turn the lever left to lock. The light still blinks orange quickly: you are in descaling mode.
- Press the coffee button once. The machine stops by itself after the first phase.
- Rinse the tank and drip tray, refill the tank with fresh water, empty the container and put it back. Press the button to rinse; when it stops blinking rapidly, descaling is complete.
- Wash the capsule container, cup support and drip tray with hot water and mild odorless detergent, then dry the machine and let it dry for 10 minutes.
If the machine will not enter descaling mode, Nespresso says it can do so only after 30 or more coffees have been brewed. The Vertuo Pop manual (Cluster 2) prints the same procedure on the same pages. Thinking of buying one? The Vertuo Pop+ review covers the machine itself.
Nespresso, Vertuo Pop+ user manual (Cluster 1, 2025), pp. 22-26 and 33; Vertuo Pop user manual (Cluster 2), pp. 22-26.
VertuoPlus: steady green and red light, a lever-and-button menu
- Signal: a steady green and red light. The machine makes coffee only a few more times before descaling becomes mandatory.
- Liquid and water: 1 unit with at least 17 fl oz (0.5 L) of water; Nespresso's support page says at least 0.8 L.
- Container: Nespresso gives three sizes: 20 fl oz (0.6 L), 27 fl oz and 0.8 L. A 1 L (34 fl oz) container is larger than all three.
- Time: about 20 minutes. Nespresso says it can be stopped at any time by pushing the button.
- Turn the machine on with the button. Push the lever up to open the head and eject the used capsule, then push the lever down to close it.
- Turn the machine off by pushing the lever down for 3 seconds. Empty the cup support and the used-capsule container.
- Fill the tank with 1 unit and at least 17 fl oz (0.5 L) of water.
- Push the button and the lever down together for 3 seconds. A steady orange light shows the special functions menu.
- Within 2 minutes, press the lever down once to choose descaling. The orange light blinks once every 2 seconds.
- Put the container under the coffee outlet and push the button to start. The machine stops by itself when finished.
- Empty, clean and rinse the tank and cup support, refill the tank with fresh water and push the button to rinse. The machine stops by itself.
- Push the button and the lever down together for 3 seconds to exit; the light turns steady green. Let the machine dry for 10 minutes.
If the machine is heavily scaled and stops blinking in the middle of the program, Nespresso says to pause for several minutes so the descaler can work, then push the button to restart.
Nespresso, VertuoPlus user manual (2016), pp. 21-23; VertuoPlus Descaling Guide, pp. 2-5; VertuoPlus support page.
Vertuo Creatista: orange descaling light, two units, a 2 L container
- Signal: the descaling light blinks orange. If the alert stays on, steam does not work until the machine is descaled.
- Liquid and water: 2 units, with fresh water up to the descale line (1 L, 33.81 fl oz).
- Container: an empty container of at least 65 fl oz (2 L), the largest any machine here asks for, under the coffee outlet and steam wand.
- Time: 25 minutes. The cycle can be paused with the Steam button.
- Nespresso recommends cleaning the steam wand tip first.
- Turn the machine on, eject any capsule, empty the capsule container and drip tray, and put them back. Close the head and lock the lever.
- Fill the tank with water to the descale line, add 2 units and put the tank back. Put the 65 fl oz (2 L) container under the coffee outlet and steam wand.
- Press the Steam and Milk Temperature buttons together: for more than 5 seconds in the manual; the guide says about 5 seconds, until the descaling light is steady yellow, the bottom and middle temperature lights are on and the Steam button flashes orange.
- Press the Steam button to start the steam and coffee descaling cycle. When it ends, discard the solution and remove, empty and rinse the tank, container and drip tray.
- Refill the tank to the MAX line with fresh water and put the parts back. Press the Steam button to run the rinse cycle.
- When the rinse ends, empty and rinse the tank, container and drip tray again, wipe the machine with a damp cloth and let it rest 10 minutes.
Nespresso, Vertuo Creatista Descaling Guide, pp. 2-5; Vertuo Creatista instruction book, pp. 20-21 and 26.
Vertuo Lattissima: a descaling pipe, two units, the cappuccino button
- Signal: the descale alert blinks orange. Fast blinking means only a few more drinks before the machine blocks itself; steady means it is blocked until descaled.
- Liquid and water: 2 units, with water up to the descale mark on the tank (about 1 L, 33.81 fl oz).
- Container: at least 1 L under the coffee outlet and the descaling pipe.
- Time: about 20 minutes in the manual, 20 to 25 in the guide.
- When the alert blinks, open the machine and let the capsule be ejected. Close the head and turn the lever to the lock position.
- Empty the drip tray, the used-capsule container and the cup support. The guide adds that the cup support and the milk frother should be removed during descaling.
- Put 2 units in the tank and add water up to the descale mark.
- Take the descaling pipe from the back of the machine and plug it into the milk carafe connector, with the machine on. The guide calls this the "steam connector on the front". Put the tank back.
- The machine enters descaling mode by itself and the cappuccino button lights up. Put the container under the coffee outlet and the pipe.
- Press the cappuccino button. The solution flows through the coffee outlet, the pipe and the drip tray until the tank is empty, and the latte macchiato button lights up.
- Empty the drip tray, capsule container, cup support and container. Rinse the tank, fill it to MAX with fresh water and put the container back.
- Press the latte macchiato button to rinse until the tank is empty. When the machine returns to ready mode, remove the pipe (the guide warns it gets hot), rinse it and store it, then refill the tank and wipe the machine.
Finish every step. Nespresso says that if the procedure is not completed, the machine stays blocked.
Nespresso, Vertuo Lattissima user manual, pp. 35-38; Vertuo Lattissima Descaling Guide, pp. 3-5; Vertuo Lattissima support page.
How do you know it is time to descale?
The Vertuo machines and the Creatista Plus tell you. The four Original two-button machines do not, as far as their manuals state: they give a count of espressos by water hardness and leave you to keep track.
| Machine | Signal | If you wait | Can you stop it? |
|---|---|---|---|
CitiZ, Essenza Mini, Inissia, Pixie | No light listed; the count in the next table | Not listed | Not listed |
Creatista Plus | DESCALE NOW on the screen | The machine stops after 10 more uses; a countdown shows the uses left | Not listed |
Vertuo Next | Light alternates orange and white 3 times, then steady | Only a few more uses before descaling becomes necessary | No: cannot be interrupted or exited (but see the disagreements) |
Vertuo Pop and Pop+ | Button blinks orange 3 times, then steady white | Only a few more uses before descaling becomes necessary | No: cannot be interrupted |
VertuoPlus | Steady green and red light | Only a few more coffees before descaling becomes mandatory | Yes, at any time with the button |
Vertuo Creatista | Descaling light blinks orange | If the alert stays on, steam does not work | Yes: pause with the Steam button |
Vertuo Lattissima | Alert blinks orange; fast blinking, then steady | Fast blinking: a few more drinks. Steady: blocked until descaled | Not listed |
For the machines that count, Nespresso's manual tables count espressos of 40 mL (1.35 fl oz) by water hardness. Nespresso's own guides print a different rule, "every 3 months or 300 capsules (whichever comes first)", in the CitiZ, Inissia, Pixie, Creatista Plus and VertuoPlus guides. Nespresso's table does not say how a lungo (110 mL) counts, and the Essenza Mini has no guide of its own, so only the manual's table applies to it.
| Machine | Manual: descale after (espressos of 40 mL) | Guide |
|---|---|---|
CitiZ | 300 hard, 600 medium, 1,200 soft | 3 months or 300 capsules, whichever comes first |
Essenza Mini | 300 hard, 600 medium, 1,200 soft | No guide of its own |
Inissia | 1,000 hard, 2,000 medium, 4,000 soft | 3 months or 300 capsules, whichever comes first |
Pixie | 1,000 hard, 2,000 medium, 4,000 soft | 3 months or 300 capsules, whichever comes first |
Creatista Plus | On the screen; the table sets 4,000 (level 0, under 50 mg/L), 3,000, 2,000, 1,500 or 1,000 (level 4, over 380 mg/L) | 3 months or 300 capsules, whichever comes first |
VertuoPlus | By alert; no interval printed | 3 months or 300 capsules, whichever comes first |
Vertuo Next, Pop+, Creatista, Lattissima | By alert; no interval printed | No interval line in the documents read |
Nespresso does not say which rule governs where the two differ, and the gap is large: a Creatista Plus owner in the softest water reads 4,000 in the manual and 300 in the guide, a factor of 13. The worked example above shows the same split for a CitiZ. The shorter interval is the cautious reading, and the longer is the one Nespresso's manual gives for your water. The Creatista Plus stops after 10 more uses and the Vertuo Lattissima blocks itself, so knowing your count matters most on those two. Still choosing a machine? The Nespresso buying guide sets out what each one asks of you in upkeep.
Can you descale a Nespresso with vinegar or another descaler?
Nespresso says no, and it names no substitute. It does not list a store-bought or third-party descaler as an alternative to its own kit, and neither does this page.
| Where | What it says |
|---|---|
US descaling guides (CitiZ, Inissia, Pixie, Creatista Plus, VertuoPlus) | Nespresso machines "should be descaled with a Nespresso Descaling Kit". Other solutions "(such as vinegar or store-bought descalers) may cause damage to your Nespresso machine." |
Descaling Kit page | "Never use vinegar as it can damage your machine." |
Vertuo Next, VertuoPlus and Creatista Plus manuals | Never use any product other than the Nespresso descaling kit, to avoid damage to the machine. |
Pixie support page | Do not use other products "(such as vinegar) that would affect the taste of the coffee". |
Warranty wording: Essenza Mini, Vertuo Next | The limited warranty does not cover defects resulting from "improper or inadequate maintenance, calcium deposits or descaling". |
Warranty wording: VertuoPlus; Creatista Plus | VertuoPlus: "improper or inadequate maintenance, calcium deposits". Creatista Plus: damage from failing to follow "care or cleaning instructions". |
The consequence is practical: a descaler that is not Nespresso's puts you outside what Nespresso's guides and manuals tell you to do, and these warranty exclusions name calcium deposits and maintenance. The kit holds two portioned pouches of lactic-acid descaling liquid, 3.38 fl oz each, and Nespresso lists it for all Original and Vertuo machines. Its pages do not say how many descales a kit covers.
Is the cleaning cycle the same as descaling?
No. A cleaning cycle rinses coffee residue out of the water path; descaling removes mineral scale. The Vertuo machines have a built-in cleaning cycle you start yourself, and the Original two-button machines do not list one.
| Machine | Built-in cleaning cycle | How it starts | How long it runs |
|---|---|---|---|
CitiZ, Essenza Mini, Inissia, Pixie | Not listed: the manuals list washing the removable parts and the coffee outlet | Not listed | Not listed |
Creatista Plus | A steam wand clean cycle through Maintenance, monthly or when the display shows "Clean Steam Wand"; no coffee-side cycle listed | Maintenance, Clean Steam Wand, then the prompts | Not listed |
Vertuo Next | Yes, at your discretion | Press the button 3 times within 2 seconds, with the machine locked and no capsule | 7 minutes; container of at least 34 fl oz (1 L) |
Vertuo Pop and Pop+ | Yes: monthly, when residue builds up or after a long break | Press the button 3 times within 2 seconds | Up to 7 minutes |
VertuoPlus | Yes, at your discretion | Push the button 3 times within 2 seconds | About 5 minutes; container of at least 27 fl oz (0.8 L) |
Vertuo Creatista | Yes for the coffee side; a separate steam wand clean cycle when its alert light is on | Coffee button 3 times within 2 seconds; steam wand cycle: hold Steam 3 seconds | 7 minutes (coffee side) |
Vertuo Lattissima | Yes for the coffee side; a separate rinse after each milk drink | Coffee button 3 times within 2 seconds | 5 minutes; container of at least 1 L |
Running a cleaning cycle does not replace descaling, and descaling does not replace washing the removable parts. Cleaning and descaling drip makers, kettles and grinders is a different job, covered in cleaning and descaling other coffee equipment.
Where do Nespresso's own documents disagree?
Nespresso publishes a manual, a descaling guide and a support page for several of these machines, and they do not always match. Each figure below is printed with its source and never averaged. If your machine's screen or lights say something different from this page, the machine wins.
| What differs | One document | Another document | Who it affects |
|---|---|---|---|
Hold time to enter and leave descaling mode | 3 seconds: the CitiZ support page, guide and 2016 manual; the Inissia manual, guide and support page; the Pixie guide and support page | 5 seconds: the 2021 manual shared by the CitiZ, Essenza Mini, Inissia and Pixie. Pixie exit: 1 second (support page), 1-3 (guide). CitiZ guide exit: 3-5. | CitiZ, Inissia, Pixie. The Essenza Mini says 5 seconds everywhere. Nespresso says the lights blink once the mode is on. |
Rinse count | The guides show one full tank; the Pixie support page one press of Lungo | The 2021 manual shows two rinses; the CitiZ, Essenza Mini and Inissia pages say "repeat twice", which can be read as two or three | The four Original two-button machines. The blocks above print the 2021 manual's two. |
How often | The manuals' tables (300 to 4,000 espressos by hardness) or an alert | The guides: "every 3 months or 300 capsules (whichever comes first)" | CitiZ, Inissia, Pixie, Creatista Plus, VertuoPlus. The Creatista Plus gap reaches a factor of 13. |
Container and water | VertuoPlus manual: 17 fl oz (0.5 L) of water, a 20 fl oz (0.6 L) container | VertuoPlus guide: at least 17 fl oz of water and a 27 fl oz container; support page: at least 0.8 L of water and container | VertuoPlus |
Leaving descaling mode | Vertuo Next manual, descaling page: the mode "cannot be interrupted or exited" | Vertuo Next manual, troubleshooting: if the machine is still blinking and you do not mean to descale, "exit descaling mode by holding the button for at least 7 seconds" | Vertuo Next |
Wording of steps | Vertuo Creatista manual: hold for "> 5 seconds". Vertuo Lattissima manual: the pipe plugs into the "milk carafe connector" | Vertuo Creatista guide: "approximately 5 seconds" until the lights show. Vertuo Lattissima guide: the "steam connector on the front", and the milk frother comes off too | Vertuo Creatista, Vertuo Lattissima |
Nespresso may correct any of these. Its machine support pages, linked below, are the place to check which figure is current for your model.
What if your machine is not in the table?
Nespresso's US support hub names more machines than this page covers: Pixie Clips, Essenza and Essenza Plus, the Original-line Lattissimas (Gran Lattissima, Lattissima One, Plus, Pro, Touch and Premium), the Original Creatista and Creatista Pro, CitiZ Platinum and CitiZ & Milk, Vertuo Up, Evoluo, the 2014 Vertuo, Expert, Prodigio, Maestria, Gran Maestria, U and Kitchen Aid. Their steps are not covered here. Do not borrow a sequence from a neighbour: the CitiZ, Vertuo Next and Vertuo Lattissima differ in the entry action, the units of liquid and the container.
Pick your model on Nespresso's machine support page for its manual and descaling guide. The name on the machine settles it, and the machine's own message wins over any page, including this one. The Original Creatista and Creatista Pro are not covered here: this page's Creatista Plus block is for the Creatista Plus only.
Different machine altogether? Breville, De'Longhi and Gaggia espresso machines are in descaling an espresso machine that is not a Nespresso, and the other capsule route is descaling a Keurig.
Still slow or not hot after descaling?
Descaling is one fix among several in Nespresso's own troubleshooting lists. For coffee that comes out slowly, the Original manuals say flow speed depends on the coffee variety and to descale if necessary. For coffee that is not hot enough, the Original manuals say to descale if necessary, and the Vertuo manuals add preheating the cup with hot drinking water from the tap. A machine that stays blocked after the procedure has not finished it: on the Vertuo Lattissima, Nespresso says the machine remains blocked until the whole procedure is completed.
If descaling does not change the symptom, espresso machine troubleshooting lists what else to check. If you are weighing how much upkeep a Nespresso asks for before you buy, the Nespresso buying guide sets out what each one asks of you in upkeep.
Sources
- Nespresso Descaling Kit (2 Pack) — Nespresso USA, accessed November 17, 2026
- Machine assistance (US): machine list — Nespresso USA, accessed November 17, 2026
- Citiz machine assistance (US): descaling and cleaning — Nespresso USA, accessed November 17, 2026
- Citiz Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- User manual of Citiz, Essenza Mini, Inissia and Pixie (2021) — Nespresso, accessed November 17, 2026
- CitiZ user manual (C112, 2016) — Nespresso, accessed November 17, 2026
- Essenza Mini instruction manual (C30, 2017) — Nespresso, accessed November 17, 2026
- Essenza Mini machine assistance (US) — Nespresso USA, accessed November 17, 2026
- Inissia user manual (zone 1) — Nespresso, accessed November 17, 2026
- Inissia Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- Inissia machine assistance (US) — Nespresso USA, accessed November 17, 2026
- Pixie Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- Pixie machine assistance (US) — Nespresso USA, accessed November 17, 2026
- Creatista / Creatista Plus Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- Creatista Plus user manual (J520, US edition) — Nespresso USA, accessed November 17, 2026
- Vertuo Next user manual (US edition, 2019) — Nespresso, accessed November 17, 2026
- Vertuo Next machine assistance (US) — Nespresso USA, accessed November 17, 2026
- Vertuo Pop+ user manual (Cluster 1, 2025-06-23) — Nespresso, accessed November 17, 2026
- Vertuo Pop user manual (Cluster 2) — Nespresso, accessed November 17, 2026
- Vertuo Pop machine assistance (US) — Nespresso USA, accessed November 17, 2026
- VertuoPlus user manual (Zone 1, 2016) — Nespresso, accessed November 17, 2026
- VertuoPlus Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- Vertuo Plus machine assistance (US) — Nespresso USA, accessed November 17, 2026
- Vertuo Creatista Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- Vertuo Creatista BVE850 instruction book (US/CA/MX) — Breville, for Nespresso, accessed November 17, 2026
- Vertuo Lattissima user manual (US edition) — Nespresso USA, accessed November 17, 2026
- Vertuo Lattissima Descaling Guide (US) — Nespresso USA, accessed November 17, 2026
- Vertuo Lattissima machine assistance (US) — Nespresso USA, accessed November 17, 2026