Skip to content
Brew Method Guide

Independent · not affiliated with Amazon

Find your setup

Research review · Grinders · Baratza

Baratza Encore Review: ZCG485 Conical Burr Grinder

Model ZCG485 · US 100-120 V; colour SKUs on the maker's US page: black ZCG485BLK1AUC1A, white ZCG484WHT1AUC1A · US model

A 40-setting conical burr grinder for drip and pour-over if you stop each grind by hand; the Virtuoso+ is the nearest alternative if you want a timer.

Best for
Filter coffee households (drip and pour-over) that don't mind stopping each grind themselves.
Consider another if
You don't want to stop each grind yourself
Burrs
Conical (40 mm conical steel burr, M3 designation, threaded burr mount (maker spec table))
Burr size
40 mm (≈ 1.57 in) (Conical steel burr)
Settings
40 settings (Setting 1 = finest, 40 = coarsest; set by twisting the hopper)
Hopper
300 g (≈ 10.6 oz) (Maker lists 300 g (10.6 oz))

Assessment based on manufacturer documentation and independent published sources; we have not physically tested this unit.

By Syed Hyder Ali · Updated · How we research

Baratza Encore Conical Burr Coffee Grinder, black

Strengths

  • Compact footprint of 13 x 15 x 34 cm
  • Maker states components are designed to last around 10 years of home use with proper care (maker-stated)
  • Ring burr lifts out for brushing; brush included

Limitations

  • Hopper, lid and grounds bin are hand wash only; burrs must not get wet or they rust
  • Grind setting may only be changed while the grinder is running or completely empty of beans
  • Coffee Chronicler states the Encore is not suited to espresso in a regular 58 mm portafilter and reports static in the bin

In short

The Baratza Encore ZCG485 is a 40 mm conical burr grinder with 40 numbered settings and a 300 g hopper, and it fits a filter coffee kitchen (drip and pour-over) that doesn't mind stopping the grinder by hand. Its main limit is that it has no timer, only an on/off knob and a pulse button (Encore manual), so you stop each grind yourself and stay with it; the manual says not to leave it unattended. At the maker's listed grind rates, a 20 g example dose takes about 9 to 15 seconds. Stop before the grounds reach the Max Fill Line marked on the grounds bin; the manual warns that the grinder may clog and be damaged past it.

Pick another grinder if you want it to stop itself at a time you set (the Virtuoso+ does), to load one dose at a time, not a hopper of beans (the Fellow Ode Gen 2 is built for it) or a dual range with an espresso side (the Encore ESP; its size, power, hopper and grounds bin match the Encore's).

Comparing more grinders? See the best grinders for pour-over.

Our take

Who should buy the Encore, and who should pick another grinder?

Best for: filter coffee households (drip and pour-over) that want a burr grinder with numbered settings and are fine stopping each grind by hand.

Pick another grinder from every coffee grinder we cover if you:

  • Want the grinder to stop itself. The Encore stops when you turn the knob off or release the pulse button. The Virtuoso+ manual lists a digital timer: set 0.1 to 40.0 seconds, press the dial, and it stops at 0.0. The Encore and Virtuoso+ manuals both say not to leave the grinder unattended while it runs, so a timer saves the stopping, not the watching (the Encore and Virtuoso+ side by side).
  • Load one dose at a time (each dose fresh, not a hopper of beans). The Fellow Ode Gen 2 review covers a grinder built around a single-dose load bin that takes up to 100 g, a third of the Encore's 300 g hopper. If you like the Encore otherwise, Baratza's Encore page lists a single-dose hopper as an accessory; confirm its fit with Baratza before you count on it.
  • Want an espresso range. Baratza splits its range by model: the Encore has one 40-setting scale, and the Encore ESP manual divides its dial into the "espresso range (settings 1-20)" and the "filter coffee range (settings 21-40)". If you brew only filter coffee, the ESP's extras are espresso-setup parts; the Encore-or-ESP table has the differences.

The hand-wash rule doesn't separate the four: Baratza says to hand wash the hopper, lid and grounds bin of the Encore, Encore ESP and Virtuoso+, and Fellow says no part of the Ode goes in the dishwasher. None of the four makers lists a dishwasher-safe part.

Still deciding between a burr grinder, a blade grinder and pre-ground coffee? Read burr vs blade grinder.

What does the Encore ask of you day to day?

  • You stop each dose. The on/off knob starts and stops it, and the pulse button runs only while you hold it. The maker lists a grind rate of 1.3 g/sec at setting 10 and 2.2 g/sec at setting 30, so a 20 g example dose runs about 15 seconds at setting 10 and about 9 seconds at setting 30 (20 ÷ 1.3 and 20 ÷ 2.2).
  • The bin is smaller than the hopper. The hopper holds 300 g (10.6 oz) and the grounds bin is listed at 120 g, so a full hopper is 2.5 bins (300 ÷ 120). At the same listed rates, 120 g takes about 55 seconds at 2.2 g/sec and about 92 seconds at 1.3 g/sec (120 ÷ 2.2 and 120 ÷ 1.3). The rule from the manual: stop before the grounds reach the Max Fill Line marked on the bin, or the grinder may clog and be damaged. The manual gives no gram figure for that line, so don't assume it equals the 120 g listed for the bin. Grind the dose you need, not the hopper.
  • Changing the grind takes a running grinder. Setting 1 is the finest and 40 the coarsest, set by twisting the hopper. The manual states that the grinder must be running or completely empty of beans when you change the setting, to prevent damage, so switch it on first.
  • Cleaning is a brush, not a rinse. The ring burr lifts out for brushing with the included brush, about once a month if you grind daily, and the manual states it must not get wet "or it will rust". The manual adds that dark, oily or flavored coffee used often without cleaning can clog the grinder, and the 1-year warranty excludes lack of cleaning.

Encore or Virtuoso+: is the timer worth it?

Choose the Encore if you weigh each dose or grind by hand and do not need a timer. Choose the Virtuoso+ (ZCG587) if you want a timer that repeats a dose without watching a scale: 0.1 to 40.0 seconds on an LED display. Baratza lists the same 40 mm conical steel burr size, 40 settings, 550 rpm, 70 W and one-year warranty for both. Neither is Baratza's espresso grinder; reviewers call the 40 steps broad for espresso, and Baratza's espresso model is the Encore ESP (see Encore or Encore ESP below).

FactorBaratza EncoreBaratza Virtuoso+
Dosing
Manual: on/off knob and a pulse button
Timer 0.1 to 40.0 seconds; hold the dial for pulse
Burr
40 mm conical steel, M3
40 mm conical steel, M2
Grind speed (maker)
1.3 g/s at setting 10, 2.2 g/s at setting 30
1.3 g/s at setting 10, 2.4 g/s at setting 30
Display and bin light
None listed
LED display; lights in the grounds bin

What does the timer set, and what can't it?

Seconds, not grams. The dial adds 1.0 second a click clockwise and takes off 0.1 second a click anticlockwise, and the grinder stops at 0.0. Baratza lists speeds only at settings 10 and 30, so there is no figure for the settings between. At setting 10 one run of 40.0 seconds reaches about 52 g (40.0 × 1.3); at setting 30 about 96 g (40.0 × 2.4). A 20 g dose fits the timer at either speed (about 15.4 seconds at 1.3 g/s), while a 60 g dose at 1.3 g/s needs about 46.2 seconds, past the maximum; pulse mode also stops at 40.0 seconds. That is our arithmetic from Baratza's figures, not a measurement.

Three consequences follow. A timed dose belongs to one setting: the same seconds give about twice the coffee at setting 30 as at setting 10, so change the setting and you re-time. The fine step is downward, because up-clicks are whole seconds and down-clicks are tenths: 15.4 seconds means going to 16 and turning back six clicks. And a scale still sets the first dose: weigh what a time gives you once, then repeat the time.

What reviewers say

  • Home Grounds (updated 2024-05-20) reports that the M2 gives a more uniform grind with fewer fines at medium to coarse settings, that the Encore has essentially caught up on speed, and that the Virtuoso+ is slightly quieter; it names the Encore the pick for most drinkers and the Virtuoso+ the pick for enthusiasts who value timed dosing.
  • Coffee Review (2020-06-13) placed the Virtuoso+ a close third of four grinders it tested, about 6% less consistent than the best of the four, reported 1.5 g retained when emptied for cleaning, and said beans "popcorn" in the hopper at the end of a dose.
  • Coffee Chronicler (Encore, modified 2026-11-01) calls the Encore entry-level and static-prone; its text mentions an M2 upgrade burr, so it may describe an earlier Encore.

What is the same, and where do reviewers differ from Baratza?

Both manuals give the same starting settings, to be adjusted by taste: espresso 8, AeroPress 12, Hario V60 15, automatic brewer 18, Chemex 20, French press 28. Baratza's tables also list the same size (13 × 15 × 34 cm), hopper (300 g) and grounds bin (120 g), but reviewers' figures for the Virtuoso+ differ, so treat those as what Baratza lists, not confirmed:

  • Noise: Baratza lists none. Coffee Review reports 90 to 95 dB for the Virtuoso+; Home Grounds reports about 82 dB for it and 85 dB for the Encore. The methods differ, so the figures are not averaged.
  • Hopper and bin: Coffee Review lists an 8 oz hopper; Home Grounds lists 10 oz and 5 oz in one review and 10.6 oz and 4.2 oz in its comparison.
  • Timer maximum: Baratza's manual says 40.0 seconds; Home Grounds' comparison says "60-second". This page uses the manual's figure.
  • Weight: Baratza lists none for either grinder; Home Grounds says the Virtuoso+ is about a pound heavier, and Coffee Review and Home Grounds each give 8 lb for it.

Not compared: grind uniformity measured on both grinders (no source did it), whether the two burr sets swap (Baratza does not say), and whether the Virtuoso+ comes with the dosing cup (its page says "Compatible with the Dosing Cup" and "Includes 58mm adapter", not that the cup is in the box). Baratza's page says the Encore's components are designed to last around 10 years of home use with proper care; the Virtuoso+ page has no such line, which is a statement about one page, not a durability difference.

How much height does the Encore need under a cabinet?

Baratza Encore Conical Burr Coffee Grinder, black
Baratza Encore ESP Coffee Grinder, black
Baratza Virtuoso+ Conical Burr Coffee Grinder, black and stainless

Baratza Encore Conical Burr Coffee Grinder13 × 15 × 34 cm (≈ 5.12 × 5.91 × 13.4 in)

Baratza Encore ESP Coffee Grinder13 × 15 × 34 cm (≈ 5.12 × 5.91 × 13.4 in)

Baratza Virtuoso+ Conical Burr Coffee Grinder13 × 15 × 34 cm (≈ 5.12 × 5.91 × 13.4 in)

Shown at relative size from published heights.

The Encore is listed at 13 x 15 x 34 cm (≈ 5.1 x 5.9 x 13.4 in, W x D x H). The maker's table does not list whether the 34 cm includes the hopper lid, so measure from the counter to the underside of the cabinet and treat 13.4 in as the minimum.

If height is the problem, Fellow lists the Ode Gen 2 at 248.3 mm (≈ 9.8 in) tall, about 3.6 in shorter than the Encore's 340 mm. Fellow lists its length and width as 239 x 105 mm (≈ 9.4 x 4.1 in) without saying which runs front to back, so check the counter's depth too.

Black or white, and when to pick the Encore ESP instead

Colours

Black (ZCG485BLK1AUC1A) is the version the Amazon button opens; white is listed as ZCG484WHT1AUC1A, so confirm the code on the listing before you buy white.

Encore or Encore ESP?

The Encore ESP (ZCG495) differs from the Encore in the three rows below. The burr mount differs too (the ESP's burr is the M2 designation on a quick-release mount, the Encore's M3 on a threaded one); the maker's pages and manuals don't say what that changes in the cup.

Maker's labelEncore ZCG485Encore ESP ZCG495
Grind settings
Setting 1 = finest, 40 = coarsest; set by twisting the hopper
Dual range: "espresso range (settings 1-20)" with "small amounts" of change per setting; "filter coffee range (settings 21-40)" with "relatively larger changes"
Range shifting
Not listed
Shims: one shim shifts the grind by about five settings
Dosing cup
Not listed
Espresso dosing cup, dosing cup base and 58 mm adapter ring

To see every field side by side, compare the Encore and Encore ESP field by field. What the rows mean for a filter-coffee buyer:

  • Dual range. The ESP's filter coffee range is settings 21 to 40, where its manual says each setting changes the grind by relatively larger amounts than in the espresso range (settings 1-20). The Encore lists one 40-setting scale with no split and no step size, so we can't say which gives finer control for filter coffee. If you brew only filter coffee, settings 1-20 are a range you won't use; if you will also grind for espresso, that is what the ESP adds.
  • Shims, dosing cup and adapter ring. The dosing cup and 58 mm adapter ring move grounds into a 54 mm or 58 mm portafilter, and the shims move the grind by about five settings each. They belong to an espresso setup, not a filter one.

The maker's pages and manuals list the same for both models: 13 x 15 x 34 cm (≈ 5.1 x 5.9 x 13.4 in), 70 W, 40 settings, a 300 g hopper, a 120 g grounds bin, a 1-year warranty and hand-wash parts. Size, power, capacity, warranty and cleaning do not separate them.

What's included

In the box

  • Hopper lid, bean hopper and grounds bin
  • Cleaning brush and on/off knob (supplied inside the grounds bin)

You'll also need

  • Whole roasted coffee beans (the manual's stated intended use) and a 100-120 V AC outlet

Ongoing costs

  • Grinder cleaning tablets may be needed for dark, oily or flavoured coffee; the manual names no product

Compatibility

  • Single-dose hopper accessory

    Compatible

    Maker page shows an Encore fitted with the single-dose hopper accessory · Baratza (Breville USA) ↗

  • Replacement or upgrade burr sets

    Not listed

    Not named in manual v4.3; the maker's parts list for ZCG485 was not read

How it compares

We may earn a commission when you buy through links on this page.

Specifications

We may earn a commission when you buy through links on this page.

Values the maker publishes, with their source
SpecValueSource
Burr typeConical, note 1Source ↗
Burr size40 mm (≈ 1.57 in), note 2Source ↗
Grind settings40 settings, note 3Source ↗
Bean hopper300 g (≈ 10.6 oz), note 4Source ↗
Grounds bin120 g (≈ 4.23 oz), note 5Source ↗
Espresso grindingManual lists a suggested starting setting of 8 for espresso; product page says the 40 settings run from cold brew coarse to espresso fine, note 6Source ↗
DriveElectricSource ↗
Grind adjustment40 settings, set by twisting the hopperSource ↗
Burr speed550 rpm, note 7Source ↗
Dimensions (W × D × H)13 × 15 × 34 cm (≈ 5.12 × 5.91 × 13.4 in), note 8Source ↗
Warranty1 year, note 9Source ↗
Voltage100–120 V, note 10Source ↗
Wattage70 W, note 11Source ↗
Dishwasher-safe partsNo: hopper, hopper lid and grounds bin are hand wash only; do not immerse the housing or wash the burrsSource ↗

Notes

  1. 1 Burr type: 40 mm conical steel burr, M3 designation, threaded burr mount (maker spec table)
  2. 2 Burr size: Conical steel burr
  3. 3 Grind settings: Setting 1 = finest, 40 = coarsest; set by twisting the hopper
  4. 4 Bean hopper: Maker lists 300 g (10.6 oz)
  5. 5 Grounds bin: Maker lists 120 g (4.2 oz) grounds bin
  6. 6 Espresso grinding: No separate espresso range is described for the Encore
  7. 7 Burr speed: Maker spec table: burr speed 550RPM
  8. 8 Dimensions (W × D × H): W x D x H as published on the maker spec table
  9. 9 Warranty: US and Canada limited warranty from original purchase date; covers defects in materials and workmanship; excludes improper use, lack of cleaning, abuse, normal wear (manual v4.3)
  10. 10 Voltage: AC, 50/60 Hz, 0.8 A (maker spec table, US version)
  11. 11 Wattage: Rated power on the maker spec table

Not listed by the maker: motor, single dosing, grind retention, weight, material, certification.

Bar chart of height in inches from the makers' figures: Baratza Encore about 13.4, Fellow Ode Gen 2 about 9.78.
Key takeawayHeight in inches from the makers' figures: Baratza Encore 34 cm (≈ 13.4 in), Fellow Ode Gen 2 248.3 mm (≈ 9.78 in). The Encore is the taller by about 3.6 in, which decides whether it clears a low cabinet.

We may earn a commission when you buy through links on this page.

Where these numbers come from
  • Baratza Encore Conical Burr Coffee Grinder: Baratza (Breville USA), accessed November 16, 2026.
  • Fellow Ode Brew Grinder Gen 2: Fellow, accessed November 16, 2026.

What the maker doesn't list: noise, retention and weight

The maker lists no noise level, grounds retention or weight for the Encore. If one of those decides it for you, check it before you buy.

Published findings

  • Coffee Chronicler · January 12, 2022

    • Describes the Encore as a entry-level grinder with 550 RPM gear-reduced burrs; says it is not suitable for espresso in a regular 58 mm portafilter and that static makes grounds cling to the bin.
    Read the publication ↗

Our verdict

Choose the Encore for a conical burr grinder with 40 numbered settings and a 300 g hopper for drip and pour-over, if you don't mind stopping each grind yourself: an on/off knob and a pulse button start and stop it, and the 120 g grounds bin holds less than half of the hopper, so grind per cup, not per hopper. Take the Virtuoso+ for a timer, or the Ode Gen 2 to load one dose at a time.

Sources

  1. Encore ZCG485 product page (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  2. Encore Operations Manual v4.3 (December 2022) — Baratza (Breville USA), accessed November 16, 2026
  3. Baratza Encore Review: Still Worth it in 2024? — Coffee Chronicler, accessed November 16, 2026
  4. Baratza Encore Operations Manual v4.3 (December 2022), PDF page 3: Safety Information — Baratza (Breville USA), accessed November 16, 2026
  5. Baratza Encore Operations Manual v4.3 (December 2022), PDF page 7: Care & Cleaning (Removing the Hopper; Removing the Ring Burr; Cleaning the Grounds Bin, Hopper & Burrs) — Baratza (Breville USA), accessed November 16, 2026
  6. Baratza Encore Operations Manual v4.3 (December 2022), PDF page 8: Reinstalling the Ring Burr and Hopper; clogged grinder — Baratza (Breville USA), accessed November 16, 2026
  7. Baratza Encore Operations Manual v4.3 (December 2022), PDF page 9: Warranty & Service — Baratza (Breville USA), accessed November 16, 2026
  8. Encore support hub, Coffee Brewing FAQs: "What cleaning and maintenance does my grinder need?" (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  9. Baratza Encore vs Virtuoso (updated 2024-05-20) — Home Grounds, accessed November 17, 2026
  10. Encore ESP ZCG495 product page (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  11. Encore ESP Operations Manual v1.0 (January 2023) — Baratza (Breville USA), accessed November 16, 2026
  12. Virtuoso+ Operations Manual v1.6 (January 2023) — Baratza (Breville USA), accessed November 16, 2026
  13. Ode Brew Grinder Gen 2 - US product page — Fellow, accessed November 16, 2026
  14. Ode Brew Grinder Gen 2 Safety and Maintenance manual (US, NGAAUS) — Fellow, accessed November 16, 2026
  15. Virtuoso+ ZCG587 product page — Baratza US, accessed November 17, 2026
  16. My Baratza Virtuoso Review (updated 2024-04-30) — Home Grounds, accessed November 17, 2026
  17. Baratza Virtuoso+ Coffee Grinder Review (published 2020-06-13) — Coffee Review, accessed November 17, 2026
  18. Baratza Encore ESP review — Tom's Guide, accessed November 16, 2026
  19. Baratza Encore ESP review: Read THIS before buying — Coffee Chronicler, accessed November 16, 2026
  20. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 3: Safety Information — Baratza (Breville USA), accessed November 16, 2026
  21. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 7: Care & Cleaning (Removing and Reinstalling the Hopper) — Baratza (Breville USA), accessed November 16, 2026
  22. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 8: Removing and Reinstalling the Ring Burr; Removing and Reinstalling the Cone Burr (its parts diagram, A to G, is on PDF page 9) — Baratza (Breville USA), accessed November 16, 2026
  23. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 10: Cleaning the Grounds Bin, Hopper and Burrs; A Clogged Grinder — Baratza (Breville USA), accessed November 16, 2026
  24. Baratza Encore ESP Operations Manual v1.0 (January 2023), PDF page 11: Warranty & Service — Baratza (Breville USA), accessed November 16, 2026
  25. Encore ESP support hub, Coffee Brewing FAQs: "What cleaning and maintenance does my grinder need?" (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  26. Baratza Virtuoso+ Operations Manual v1.6 (January 2023), PDF page 3: Safety Information — Baratza (Breville USA), accessed November 16, 2026
  27. Baratza Virtuoso+ Operations Manual v1.6 (January 2023), PDF page 7: Care & Cleaning (Removing the Hopper; Removing the Ring Burr; Cleaning the Grounds Bin, Hopper & Burrs) — Baratza (Breville USA), accessed November 16, 2026
  28. Baratza Virtuoso+ Operations Manual v1.6 (January 2023), PDF page 8: Reinstalling the Ring Burr and Hopper; clogged grinder — Baratza (Breville USA), accessed November 16, 2026
  29. Baratza Virtuoso+ Operations Manual v1.6 (January 2023), PDF page 9: Warranty & Service — Baratza (Breville USA), accessed November 16, 2026
  30. Virtuoso+ support hub, Coffee Brewing FAQs: "What cleaning and maintenance does my grinder need?" (Baratza US) — Baratza (Breville USA), accessed November 16, 2026
  31. Ode Standard Brew Burrs - US parts page — Fellow, accessed November 16, 2026
  32. Fellow Ode Coffee Grinder Review (Gen 2 update) — Home Grounds, accessed November 16, 2026
  33. Fellow Stagg EKG Pro Kettle & Ode Grinder 2 Review: Worth the Upgrade? — Gear Patrol, accessed November 16, 2026
  34. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 4 (printed pages 6–7): Important; Caution — Fellow, accessed November 16, 2026
  35. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 5 (printed pages 8–9): Cleaning and Use (Before Use) — Fellow, accessed November 16, 2026
  36. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 6 (printed pages 10–11): General Cleaning; Automatic Cleaning — Fellow, accessed November 16, 2026
  37. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 7 (printed pages 12–13): Removing and Replacing the Grinding Burrs — Fellow, accessed November 16, 2026
  38. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 8 (printed pages 14–15): Removing and Replacing the Grinding Burrs (continued) — Fellow, accessed November 16, 2026
  39. Fellow Ode Brew Grinder Gen 2 Safety and Maintenance manual (US/Canada, model NGAAUS, file SM_NA_V3; PDF pages are two-page spreads), PDF page 9 (printed pages 16–17): Warranty — Fellow, accessed November 16, 2026
  40. How do I keep the Ode Brew Grinder Gen 2 clean? (Fellow Help Center, Ode Gen 2: Product Care & Materials) — Fellow, accessed November 16, 2026
  41. How to clean & maintain your Ode Brew Grinder (Fellow Help Center; covers Ode Gen 2 and Ode Gen 1) — Fellow, accessed November 16, 2026

Update history

  1. Published